Description
Sawmill Line Lasers Sizes for Headsaw, Edger, or Other Kit
1 Year Warranty
Available in Green and Red Color
Green Laser Light 532nm 20 mW – 50 mW
The 532nm green line laser module is self-contained and designed for use in industrial alignment situations. Like sawmills and wood working. medical and scientific applications approved.
It generates a visible homogeneous distribution line with an aperture angle of 90°. Which also means it stays a green consistent line from end to end.
Specifications :
- Laser Class : 2, 3R, 3B (II, IIIa, IIIb)
- Wavelength : 532nm
- Output Power : 50mW (10mW and 20mW available)
- Output Mode : Continuous
- Input Voltage : 3V DC
- Operation Current : < 300mA
- Operation Temp. : 68°F (20°C) – 86°F (30°C)
- Beam : Line ( 90° fan angle)
- Divergence : 1.4mrad
- Expected Lifetime : > 4000 hours (severe vibration reduces expected life)
- Case Material : Metal
- Length : 2-3/8” (60mm)
- Diameter : 25/32” (20 mm)
Red Laser Light 650nm 20mW, 50mW and 100mW
The 650nm DPSS red line laser module is self-contained and designed for use in Sawmill, industrial alignment, medical and scientific applications.
It generate a visible homogenous distribution line with an aperture angle of 90°
Specifications :
- Laser Class : II (2), IIIa (3R), IIIb (3B)
- Wavelength : 650nm
- Output Power : <100mW (20mW and 50mW available)
- Output Mode : Continuous
- Input Voltage : 3V DC
- Operation Current : < 30mA
- Operation Temp. : 14°F (-10°C) – 104°F (40°C)
- Beam : Line ( 90° fan angle)
- Divergence : 0.8 mrad
- Expected Lifetime : > 4000 hours (severe vibration reduces expected life)
- Case Material : Aluminum
- Length : 2-3/4” (70mm)
- Diameter : 5/8” (16 mm)
Warning! These lasers emit radiation that can be harmful to the eye. Do not look directly into the laser aperture. Direct viewing of laser beam at close range may cause severe eye damage!!
Mounting Bracket
This multidirectional metal mounting bracket facilitates positioning and to provide additional heat sink protection to the laser diode module. Accommodates lasers 25/32” (20mm) in diameter.
Laser diode modules are positive to the case for optimal heat sinking. Do not mount metal brackets to the negative supply or negative earth without additional electrical isolation.
Size: 3-3/8” x 1-9/16” x 2-9/16” (85 x 40 x 65mm)
Power Supply
110/220, power supply adapter, 3 or 5V for laser modules. Includes 2 aligator clips
Specifications :
- Input : 110 / 220V
- Output : 3V DC, 500mA
- Dimensions : 2-3/4” x 1-13/16” x 1-1/16” (70 x 46 x 27mm)
Laser Light Switch
Convenient power switch to plug between the power adapter and the module
Comes with Male and female plug connectors.
Total length: 16” (40mm)