Sale!

Green Line Sawmill Headsaw Edger Laser Light Generator Kit 20mw

$499.00 $450.00

  • Green Laser Line Light
  • Laser Mount
  • Power Supply
  • Laser Light Generator Switch
SHIPS FREE WHILE ON SALE!

Description

20mw Green Line Sawmill Headsaw Edger Laser Light Generator Kit

 1 Year Warranty

Green Laser Light 532nm

The 532nm green line laser module is self-contained and designed for use in industrial alignment situations. Like sawmills and wood working. medical and scientific applications approved.

It generates a visible homogeneous distribution line with an aperture angle of 90°.  Which also means it stays a green consistent line from end to end.

 

Specifications :
  •             Laser Class :             2, 3R, 3B (II, IIIa, IIIb)
  •             Wavelength :            532nm
  •             Output Power :         <20mW (10mW and 50mW available)
  •             Output Mode :           Continuous
  •             Input Voltage :          3V DC
  •             Operation Current : < 300mA
  •             Operation Temp. :    68°F (20°C) – 86°F (30°C)
  •             Beam :                        Line ( 90° fan angle)
  •             Divergence :              1.4mrad
  •             Expected Lifetime : > 4000 hours            (severe vibration reduces expected life)
  •             Case Material :         Metal
  •             Length :                     2-3/8” (60mm)
  •             Diameter :                  25/32” (20 mm)

 

Warning! These lasers emit radiation that can be harmful to the eye. Do not look directly into the laser aperture. Direct viewing of laser beam at close range may cause severe eye damage!!

Mounting Bracket

This multidirectional metal mounting bracket facilitates positioning and to provide additional heat sink protection to the laser diode module. Accommodates lasers 25/32” (20mm) in diameter.

Laser diode modules are positive to the case for optimal heat sinking. Do not mount metal brackets to the negative supply or negative earth without additional electrical isolation.

Size: 3-3/8” x 1-9/16” x 2-9/16” (85 x 40 x 65mm)

Power Supply

110/220, power supply adapter, 3 or 5V for laser modules. Includes 2 aligator clips

 

Specifications :
  •             Input :             110 / 220V
  •             Output :          3V DC, 500mA
  •             Dimensions : 2-3/4” x 1-13/16” x 1-1/16” (70 x 46 x 27mm)

 

Laser Light Switch

Convenient power switch to plug between the power adapter and the module

Comes with Male and female plug connectors.

Total length: 16” (40mm)

Additional information

Weight 2.5 lbs
Dimensions 8 × 6 × 3 in